How to repair beats headphones?

Are your Beats headphones in need of repairs? And don’t know how to repair beats headphones? Don’t worry – with a few simple tools and some basic know-how, you can easily repair them yourself!

How to repair beats headphones?

In this blog post, we’ll walk you through the steps of how to repair Beats headphones, as well as provide you with the necessary tools required to complete the job. Read on to find out more!

Most people usually buy expensive headphones, and if they need to repair them, they have no choice but to get it done by a professional.

When it comes to repairing headphones, there are two ways of doing it. One way is to do it yourself and the other is to get it done by a professional.

The problem with the second option is that it’s expensive and takes a lot of time. You probably can’t imagine spending $300-$500 for a pair of headphones.

But, as we all know, the price doesn’t mean anything if the product isn’t worth it. With Beats headphones, that’s the case. It is not easy to repair your own headphones because you may not know what to do. 

But, what happens if you can’t get them repaired? Well, there are a couple of things you can do to fix it.

 Repairing Beats Headphones: Should You DIY?

How to repair beats headphones? Doesn’t it sound weird?

If you need to get your headphones repaired, you may not be sure if you should do it yourself or ask for it to be repaired by professionals.

If you decide to do it on your own, you should know that it is not easy to repair your own headphones. But if you can do it, it would be very satisfying and rewarding.

There are many advantages and disadvantages to getting your Beats headphones repaired. You should make the right decision based on the condition of your headphones.

You should check whether it is damaged and how much time has passed since you bought it. If you can do it yourself, you will save a lot of money.

How to Repair Beats Headphones?

The headband are the most crucial part of headphones. Beats headphones are designed with plastic to make them lighter in weight. As a result, they’re more likely to break or smash than headphones made with metal. In that case, you need to handle them with care.

Tools required to repair:

You can repair your headphones yourself with the use of simple tools.

However, if you don’t have the proper tools, you might end up ruining your headphones. But if you have them, you will be able to make it look like new again. .

It is a good idea to buy a headphone repair kit if you want to repair your own headphones. There are many different kits available in the market. However, you should buy the best one because they will make your task easier.

 In order to repair your beats headphones, you will need these few tools to get the job done.

  • Torx screwdriver
  • Needle-nose pliers
  • Replacement headband 

A Torx screwdriver with a hexagonal tip is ideal for repairing headphones. A pair of needle-nose pliers will help you to open and close the headband.

Your Beats headphones should have a replacement headband because it keeps your headphones in good condition.

6 quick steps to repair beat headphones:

6 steps to repair beats headphones?

Many headphones are easy to repair. The one that I am talking about is the Beats headphone. To repair it, you only need to follow a few steps. 

Here is a step-by-step guide for how to fix your beats headband:

  1.  The first thing you should do is to disconnect any wires that are connected to the headphones. This will prevent the device from receiving electricity.
  2. Use the Torx screwdriver to remove the four screws on both sides of the headband.
  3. Slide off the cushion and H-shaped hinge protector and set them aside
  4. Carefully snap off and replace the old headband piece with a new one before sliding it back into place
  5. Put the wire that connects to the headphone cups through the middle groove on top
  6. Reattach hinge protectors and cushion, then put in place with a small headband piece with the Beats logo. You’re all done!

How to Change Beats Headphones’ Batteries?

If your Beats headphones are starting to sound a little worse for wear, it might be time to change the batteries. Here’s how to do it:

  1. Remove the back cover of the headphones. You’ll see two batteries inside.
  2. Use a small Phillips screwdriver to remove the screws holding each battery in place.
  3. Take out the old batteries and insert new ones in their place. Make sure the positive and negative ends are facing the correct way before you screw them in place.
  4. Replace the back cover and screw it in place. Your headphones are now good as new!

How to Repair Beats Headphones’ Speakers?

If your Beats headphones have stopped working, it may be because the speakers have blown. You can usually tell if this is the case if you hear a popping or crackling sound when you try to use them.

While it is possible to buy replacement speakers, they can be expensive. Fortunately, there is a way to repair your existing speakers without spending a lot of money.

Tools you will need:

To repair your Beats headphones’ speakers, you will need:

-A Phillips head screwdriver

-A soldering iron and solder

-Wire cutters

-Replacement speaker drivers (if necessary)


  1. Use the screwdriver to remove the screws from the back of the ear cups. Be careful not to lose them!
  2.  Carefully peel back the ear cup covers. You may need to use a bit of force to get them off.
  3. Take a look at the speakers inside. If they are blown, you will see cracks in the speaker cone. If this is the case, you will need to replace them with new ones.
  4. To do this, carefully desolder the wires from the old speaker drivers and remove them from the ear cups.
  5.  Cut some new pieces of wire that are long enough to reach from the new drivers to where the old ones were attached.
  6. Solder these new wires onto the new drivers, making sure that they are securely attached.
  7. Reattach the drivers to the ear cups and screw everything back

How to Repair Your Broken Beats Headphone Plugs?

If your Beats headphones have broken plugs, don’t despair! With a little bit of know-how and the right tools, you can easily repair them yourself.

First, start by removing the damaged plug from the headphone jack. Next, use a pair of wire cutters to carefully remove the insulation from the wires. Be careful not to cut too deeply and damage the wires.

Once the insulation is removed, use a soldering iron to heat up the exposed wires and join them together. Make sure that the connection is secure and free of any gaps or voids.

Finally, re-attach the plug to the headphone jack and test it out. If all goes well, your Beats headphones should be as good as new!

How to Replace Your Beats Headphone Pads?

 First, use the pliers to remove the broken ear cushion from the headband. Next, unscrew the two screws that hold the headband together using the Phillips head screwdriver. Be careful not to lose these screws.

Once the screws are removed, you should be able to pull the headband apart. Inspect the inside of the headband for any wires that may have come loose and reconnect them if necessary.

If there are no loose wires, proceed to the next step.

Use the small flathead screwdriver to pry off the old foam padding that is glued to the inside of the headband.

Once you have removed all of the old foam, use super glue to attach new foam padding in its place. Make sure that the new foam is positioned correctly before allowing the glue to dry.

Finally, reassemble the headband by screwing it back together and attaching new ear cushions (if necessary). Your Beats headphones should now be as good as new!

How to Repair Beats Headphones via Apple Support?

If you’re having trouble with your Beats headphones, you can try repairing them yourself or contacting Apple Support for help.

To repair your Beats headphones yourself, start by checking the audio cable and connectors for any damage. If you see any frayed wires or damaged connectors, you’ll need to replace the audio cable or connectors.

If the audio cable and connectors are in good condition, then check the ear cups for any cracks or damage. If the ear cups are damaged, you’ll need to replace them.

Once you’ve checked all of the above, if your Beats headphones are still not working properly, then contact Apple Support for further assistance.

  1. If your Beats headphones are in need of repair, you may be able to do so via Apple Support. To start, visit Apple’s support website and log in with your Apple ID. Once you’re logged in, click on the “Contact Apple Support” link.
  2. On the next page, select the “Beats by Dre” option from the drop-down menu labeled “What product do you need help with?” You’ll then be presented with a number of options for how to contact Apple support regarding your Beats headphones.
  3. You can either chat online with an Apple support representative or schedule a call for a later time. If you choose to chat online, you’ll be asked to provide some basic information about your issue before being connected with a support representative.
  4. Once you’re connected, simply explain the problem you’re having with your Beats headphones and follow the instructions provided by the support representative. In most cases, they’ll be able to help you troubleshoot the issue and get your headphones working again.

If your Beats headphones are still under warranty, you may also be able to get them repaired or replaced for free. For more information on Apple’s warranty coverage for Beats products, visit their website or contact apple support directly.

Related FAQ’s

Can Beats headphones be repaired?

Well yes, you can repair beats headphones- Take a look at 6 steps on how you can repair beats headphones.

How do I fix my Beats headphones not working?

Hold the power button and the volume button to fix your beats headphones. If you see the LED lights indicating flash release the button right there your headphones seem to be reset.

Here you go fix your beats headphones.

Can Beats wired headphones be repaired?

Well, yes your beats wired headphones are repaired- If you follow the above-mentioned guidelines.

How do you fix Beats headphones when only one works?

In the case when one side of the headphones works all you need is to reconnect the entire headphones by touching the Bluetooth button on your device and reconnecting it.

Here you can how to connect Jabra headphones.


Beats headphones can be a great way to enjoy your music, but sometimes they break or need repairs.

We hope that our guide has helped you understand how to figure out what is wrong with your Beats headphones and how to repair them yourself at home.

With the right tools and knowledge, you should now have all of the information needed to keep your Beats headphones in good working order for years to come.

Add a Comment

Your email address will not be published. Required fields are marked *